Thursday, April 20, 2017

Of Lords, Butchers and Fodder

In addition to the rather large fellows I've been working on for the past couple months, I've also been slowly grinding away at expanding my various heresy-era forces.

The first addition was to my Ultramarines in the form of a rather badass looking Praetor model I picked up from the same guy who sold me the knights. I believe this is a conversion from the Minotaurs lord model - a very unique looking guy. Originally fully gold, I gave him a bath of Simple Green and repainted him in legion heraldry.
 photo UMC1.jpg photo UMC2.jpg photo UMC3.jpg

Next up were some butchers for my World Eaters. Rather than have them lug the rather unsightly stock power axes, I decided to swap out their basic weapons for a range of gladiatorial instruments which I feel suit the legion's background quite well - hammers, flails, cutlasses, scythes and even halberds. I intend to flesh this unit out to its maximum size in the coming weeks.

 photo But1.jpg

Finally, I also did a bunch of testers for my traitor guard to accompany those renegade tanks I posted some months ago. These were a combination of plastic Soviet greatcoats by Bolt Action Miniatures mated with various accessory parts from Victoria Miniatures. I'm quite pleased with the end results. The scheme was simple and meant to reflect the mass produced nature of these poor conscripted bastards.

Tuesday, April 18, 2017

Silent Knight, evil Knight

First of all, apologies! I have neglected the blog for a couple months due to work - rest assured I have not been hobby idle and have a fair amount of content to share over the next couple weeks.

Lets start this with a big one. A few weeks ago I was fortunate enough to come across a bargain sale of two Forge World knights from a lovely chap in my neck of the woods for a mere 50 AUD each. Now, I've never had any particular interest in knights, but at this price I simply couldn't resist. For one hundred dollary doos I picked up a Cerastus Knight Atrapos and a Cerastus Knight Castigator. This week we will take a look at the former.

 photo EK1.jpg

The kits themselves were in solid condition, although Atrapos required a little bit of TLC to get him fully back on his feet, as he was missing a few parts. In the end, I decided to evil-i-fy him up to fill in the gaps, adding some emerging spikes on his armor along with a few patches of emergent mutated flesh to represent the slow seeping in of Chaos taint.

 photo EK2.jpg

Rather than go all polished and illustrious looking, as I had done previously on the epic titans, I decided to go full hot with weathering on both knights. Rust and grime, oil and scratches showing a heavily used and battle hardened killer mech.




 photo EK3.jpg

Figuring out a scheme for this guy was also a bit of a trick. After briefly considering a red/yellow pattern, I picked up a pot of GW's airbrush-ready Caliban green and was not disappointed. The color modulated very well and had good flow and consistency. I'm definitely tempted to pick up some more GW-air stuff in the future, as the colors are quite striking and build up well.

 photo EK4.jpg photo EK5.jpg
I never really realised how big these guys were, even when compared with a regular GW knight. I would estimate their height is close to a match for a Warhound.
 photo EK6.jpg

The Atrapos seemed especially apt to the evil aesthetic. With its very rounded and insectile hull, the beast already exudes a sinister vibe. This is of course not even considering the lore, with its use of black hole tech weaponry.
 photo EK7.jpg
Of course, with a canvas this big I wasn't going to hold back on any wanky techniques and employed the airbrush glow effect I had previously used on the Leviathan on both weapons :)

 photo EK8.jpg
Similarly, the greave plates were just begging for heraldry and battle honors.

 photo EK9.jpg

Overall - a very fun project and good stress relief over the past few weeks! A welcome addition to my renegade forces.

Stay tuned

Friday, January 13, 2017

Aerial Chainaxe Delivery System

This week we have a Heresy World Eater assault squad on display. I wanted to get these airborne maniacs done and dusted before the big apartment move I have to do next week, and just managed to scrape by with them, phew! With this squad finished I have now got a fully operational 30k force, ready for the tabletop!

 photo Assault1.jpg

I think dual-wielding 'come at me bro' guy is my favorite of the lot

 photo Assault2.jpg

As with previous efforts, the trick was to keep the white as dirty as possible

 photo Assault3.jpg photo Assault5.jpg photo Assault4.jpg

Ready to split some loyalist heads (still need to add a few tufts)

 photo Assault6.jpg

Sunday, January 8, 2017

The Lord of Iron

I've always had a fairly big soft spot for the Iron Warriors. They were one of the first complete armies I finished in my youth and the Siege of Hydra Cortanus was one of the more memorable 40k tales to me. As a result, I was always interested in trying to tackle the legion's founder, Pertuarbo and decided to bite the bullet a few months ago and pick up the model.

 photo Perty1.jpg

As with Angron, I decided to eschew the standard scheme on the model and opt for a sea grey base over the usual burnished metal we expect in the legion. This allowed for a bit more variance, with the joints, gunbarrels and other areas retaining their metallic finish distinct from the rest of the panoply.

 photo Perty3.jpg

Once again, I opted to bedeck the Primarch out with a helmet, as I felt it really suited the overall imagery of this walking tank. The Iron Warrior upgrades of the MK III Iron Armor seemed to fit suitably, with its enhanced optics.

 photo Perty2.jpg

I must say that the kit itself is a bit odd. Despite his HUGE base, the default position of perty actually has him leaning greatly to one side in a manner that suggests he is about to tip over. I tried to fix this a bit, but he still seems a tad imbalanced.

  photo Perty4.jpg

Even compared to his other contemporaries, Perty is a large lad. He positively dwarfs Angron, even without the added height advantage of a dead Knight.

 photo Perty5.jpg

Wednesday, December 28, 2016

30K: Traitor tank platoon

Another big pile of resin powered through this week in the form of a traitor Russ platoon for 30k. These guys were a treat to paint with lots of space to work with on 28mm vehicles.
 
 
 
 photo TRUSS1.jpg
 
As I wrote on the Stormhammer, I wanted these guys to radiate a degree of normalcy and not just be reduced to the usual trope of evil, drooling madmen so common in GW imagery of traitors. The idea was to integrate certain aesthetic elements of chaotic influence, while at the same time retaining a degree of humanity within both the individuals and the equipment they used. Its rare that a cadre of warriors sees their own cause as anything less than noble, so I wasn't particularly sold on bedecking the tank in skulls and the flayed skin of five year olds. Instead, I went with some chaos iconography that would be applied as a rejection of Imperial dogma, alongside more banal markings like unit numbers and quaint tank names.

 photo TRUSS2.jpg
 
Similarly, I wanted to leave the crew themselves as normal as possible, rather than giving them a spiked tail or what have you.
 
 photo TRUSS3.jpg photo TRUSS4.jpg
 
The crew themselves were actually drawn from Bolt Action's range of Soviet tankers. I've always been a fan of the softcaps worn by Russian tankers and their clients and felt the look went well with the clunk of the Russ.
 
 photo TRUSS6.jpg
 
 photo TRUSS5.jpg
 
All tanks were based on the Forgeworld Mars-Alpha hull. I always much preferred this to the standard plastic GW kit, as it gives the tank a sense of more even distribution and realistic proportions.
 
 photo TRUSS7.jpg
 photo TRUSS11.jpg
The scheme was actually an upscaled version of the disruptive camouflage I employed on my Epic Krieg some time ago, mixing olive drab with a muted sand tone. I felt these went really well together and certainly seemed like they would work effectively in a muddy, trench warfare setting.
 
  photo TRUSS8.jpg
 photo TRUSS10.jpg
 
Pintel weapons were drawn from Victoria Miniatures range. These have a lot more character than the standard GW affair in my very humble opinion.
 
 photo TRUSS12.jpg
 
The Incinerator was by far my favorite of the three. Taking the lessons learned from previous projects on affecting glow effects, I gave the barrel a nice white-red heat glow to simulate the beam coil powering up for a blast.
 
 photo TRUSS13.jpg
 
As ever, 28mm remains a joy to weather, the scale allows for so many different little touches!
 
 photo TRUSS15.jpg
 
 photo TRUSS16.jpg
 
 photo TRUSS17.jpg
 
I also used the time to revisit the Stormhammer and give it a tank commander to really hit home the sheer size of the thing.
 
  photo Stormturret.jpg

Monday, December 26, 2016

People's Liberation Army

What's this? Modern miniatures in a modern wargame blog? Heresy! I've found that since returning to the Sci-Fi fantasy scene I've had only a smidgen of a desire to return to the subject matter, however, my interest was recently re-piqued when I found myself randomly browsing the Empress Miniatures catalogue. Having always had a bit of a closet interest in the Sino-sphere of military affairs, I was quite struck by the quality of these fellows and in particular their 28mm scalings. With that in mind, I picked up a few packs to play around with - nothing overly committing ;)
 photo PLA1_1.jpg
 
As previously, I opted for a Central Asian desert 'digital' style over the more familiar grey/forest camo we see in most PLA propaganda. Obviously, the scale up allowed for a bit more complexity in the patterns.
 
 photo PLA2_1.jpg
 
I also did up a couple special weapons dudes, with an LMG and a DMR.
 
 photo PLA3_1.jpg photo PLA4.jpg
 
As yet to come are another fire team and a RPG team. I think my next purchase will be an APC for the full squad, then I'll look at fleshing out a Platoon's worth of dudes, along with a tank.
 
  photo PLA5.jpg